Garden Drip Irrigation...

Description

Garden Drip Irrigation System SinglePump Controller Timer Device Automatic Watering Kits Indoor Irrigation System Plant Watering

Name: Intelligent drip irrigation system
Accessories: host, drop arrow, tee, water pipe, filter head, USB data cable
Color: black, white
Size: height 7.2cm/2.83in, diameter 9cm/3.54in
Working voltage: 3.7V
Current: 1A
Power: 3.7V
Flow rate: 0.85L/min
Head: 3 meters
Suction range: 2 meters
Water pipe size: 4/7

Package details:
Single pump 10m set: 1 host, 10 drops of arrow, 10 tee, 10m water pipe, 1 filter, 1 USB data cable
Single pump 15m set: 1 host, 15 drops of arrow, 15 tee, 15m water pipe, 1 filter, 1 USB data cable
Single pump 20m set: 1 host, 20 drops of arrow, 20 tee, 20m water pipe, 1 filter, 1 USB data cable

Instructions for use
1. Power supply mode The product can be installed with 4 AA batteries or use USB power supply (when the two methods are used at the same time, USB power supply will be given priority)
2. Turn on the water pump manually
In bright screen mode (showing AUTO on the right), long press the "SET" button to turn on the manual mode. The pump will stop automatically after 5 minutes after it is turned on.
3. Program setting: the program will be automatically saved if no operation is performed within 5 seconds during the setting process
When the screen is on, press the "SET" key "HOW LONG" to set the beating (watering time)
After the number is the unit (SEC seconds / MIN minutes) Press "＋/－" to adjust the parameters and long press for quick adjustment

1. "HOW LONG" watering time setting is completed, press "SET" key "HOW OFTEN" jump to set the interval time
After the number is the unit (HRS/hour DAY/day), press "＋/－" to adjust the parameters, long press to adjust quickly
2. Start watering and wait for 5 seconds. The machine will automatically save the program or press the "SET button twice, then it will water once, and then it will run according to the set program.
3. When you need to specify the time for watering, press the "SET" key to set the "DELAY" (delay) after how long
After the first watering unit (HRS/hour) is set, press the set button to save or wait for 5 seconds to automatically save

1. Cut water pipes

Cut the water pipe to the required length

2. Install the tee

Install the three-way head of the cut water pipe

3. Insert the dropper

Insert a drop arrow into one end of the water pipe

4. Install the filter head

Intercept a section of water pipe and insert it into the filter head

5. Turn on the host

Connect the inlet and outlet pipes and press open

6. Drop the arrow into the basin

Insert the drop arrow into the flower pot to pass water

Frequently Asked Questions

Is the watering device connected to a power source? How long can it last on a single charge?

This product has a built-in universal battery that can be charged for 4 hours. If it is set to be watered for 99 seconds per day, it can be used for 3 months

Is it easy to install? Do you need additional parts?

The installation of this product is very simple, follow the instructions, and it can be installed in a few minutes. There is a set and no other accessories are required.

How to place the flower pots and how to use them in a standard way?

Generally, the watering height of the watering device is about 2m, and the height of the pipe can be placed according to your own needs. The closer the arrow is to the watering device, the higher the watering efficiency.

If the water in the storage bucket is used up, will the pump burn out if it is idling?

No dangerous accidents will occur when the pump is idling

What should I do if I go out on a business trip?

Before going out, test the watering settings and measure the daily watering amount. If your watering amount is about 500ml each time, then you will need about 3.5l of water for 7 days on a business trip. It is recommended to use a large-capacity container. The water is sealed with a film to avoid evaporation of water